Skip to main content
iVentureTeam
Odoo Inventory & Logistics

Odoo Work in Progress Inventory: Why Finished Goods Show Zero

Odoo work in progress inventory explained: why finished goods show zero, where WIP sits in 1, 2 and 3 step manufacturing, and how to post WIP entries.

Siddharth JambukiyaSiddharth JambukiyaOdoo Techno-Functional Consultant
November 15, 202612 min read2 views
Odoo Work in Progress Inventory: Why Finished Goods Show Zero cover

A sales rep checks stock, sees zero finished goods and tells the customer the order will be late. Meanwhile, most of the order is already on the last work center. Our Odoo ERP for manufacturing setups fix this by making work in progress visible.

Related service: Odoo for logistics — shipping, tracking and warehouse operations in one place.

This guide is for production managers, planners and controllers who use Odoo Manufacturing and keep hearing "Odoo says we have none." If you are still choosing a system, start with our ERP for manufacturing guide.

What is work in progress inventory in Odoo?

Work in progress inventory in Odoo is everything between "components picked" and "finished product stored": consumed materials, labor time and partly built units on open manufacturing orders. Odoo tracks it in three different places, which is why people struggle to find it.

  • Quantities: the Components tab of the manufacturing order (MO) shows a Consumed column, and the Work Orders tab shows Real Duration.
  • Locations: picked components wait in a pre-production location, and built goods can wait in a post-production location.
  • Value: the MO Overview shows planned MO Cost against Real Cost, and finance can post that real cost to a WIP account.

Odoo's work-in-progress costs documentation describes this split. Count, location and value are three views of one run.

Why does Odoo show zero finished goods while stock is in production?

Odoo shows zero finished goods because the product is created in stock only at the moment the MO is marked done. Until someone clicks Produce, the units on the shop floor are not on hand.

Odoo's docs say that after the work orders are complete, clicking Produce marks the MO as done and registers the manufactured products into inventory. Before that, the MO holds a demand, not stock.

Illustrative example: an MO for 200 units has 120 units through the last operation. Inventory still shows zero for the finished product, because the order is open. If nobody records a partial production, those 120 units stay invisible to sales and to delivery orders.

Odoo forum users report the same symptom. One user on Odoo 13 finished an MO but saw on-hand stock stay at zero; the advice was to check the finished products location and the manufacturing operation type.

The usual causes, in the order we check them:

  • The MO is still open: work is done on the floor, but nobody clicked Produce.
  • Goods are in Post-Production: 3 step manufacturing put them there, and the store transfer is not validated.
  • Wrong destination: the MO or the Manufacturing operation type sends finished goods to a location people do not look at.
  • Wrong warehouse: the MO ran in a second warehouse, and the report is filtered to the first.
  • Reading the virtual location: someone looks at Production and sees negative numbers.

How do 1-step, 2-step and 3-step manufacturing change where stock sits?

Odoo manufacturing steps: Where does your stock wait in production?

The number of manufacturing steps decides how many transfers Odoo creates and where components and finished goods wait. It is set per warehouse, so each warehouse can work differently.

SettingTransfers createdWhere components waitWhere finished goods landVisibility risk
Manufacture (1 step)MO onlyStock, until consumedStock, when MO is doneLow, but no picking record
Pick components then manufacture (2 steps)Pick Components (PC) + MOPre-Production locationStock, when MO is doneComponents look "gone" from stock
Pick components, manufacture, then store products (3 steps)PC + MO + Store Finished Product (SFP)Pre-Production locationPost-Production, then Stock after SFPFinished goods missing from WH/Stock

You change it under Inventory, Configuration, Warehouses, on the Warehouse Configuration tab, in the Manufacture field. Odoo's three-step manufacturing guide shows the extra store finished products transfer.

Where is the Odoo WIP location, and what do Pre-Production and Post-Production hold?

There is no single "WIP location" in standard Odoo; WIP sits in Pre-Production for picked components, in Post-Production for built goods, and in the virtual Production location while the MO consumes and creates stock. Each one answers a different question.

In Odoo 20 source code, the warehouse creates two internal locations named Pre-Production and Post-Production. Pre-Production is active in 2 and 3 step mode, and Post-Production only in 3 step mode.

Both are internal locations, so their stock counts as yours. But they sit beside WH/Stock, not inside it. A delivery that reserves from WH/Stock cannot use units still waiting in Post-Production.

The virtual Production location is different. It is not a real place on your floor. Components move into it when consumed, and finished goods move out of it when produced, so negative balances there are expected.

One Odoo 15 user was alarmed to see Stock/Production go negative every time they produced. That is a reporting mistake, not lost stock: exclude virtual locations from your stock reports.

How do you fix finished goods showing zero in Odoo?

Fix zero finished goods by checking, in order, the MO state, the manufacturing steps, the destination locations and the report filters. Most cases are solved in the first three steps.

  1. Check the MO state. Open Manufacturing, Operations, Manufacturing Orders and filter on orders in progress. If work is done on the floor, record production and click Produce.
  2. Record partial output. If only part of the order is finished, enter the quantity produced, click Produce and create a backorder for the rest.
  3. Check the warehouse steps. Confirm whether the warehouse runs 1, 2 or 3 steps. If 3 steps, open the MO Transfers button and validate the Store Finished Product transfer.
  4. Check destinations. On the Manufacturing operation type, confirm the default destination. Remember that the MO finished products location is set while the order is in draft.
  5. Check put-away rules. If finished goods must go to a shelf, use put-away rules under the destination location instead of editing each MO.
  6. Fix the report. In Inventory reporting, group stock by location and show internal locations only, so Post-Production appears and virtual locations do not.

A forum answer on setting the finished parts location notes the field is editable only in draft in Odoo 16.4 and suggests 3 step manufacturing for control over storage.

How do you see WIP inventory value in Odoo accounting?

To see WIP value on the balance sheet, post a WIP accounting entry from the open MO; Odoo does not post it automatically as work progresses. The entry reflects real cost consumed up to that moment.

Set the accounts under Accounting, Configuration, Settings, in the Inventory Valuation section. Odoo's defaults are 110500 Work in Progress for the WIP Account and 110400 Cost of Production for the WIP Overhead Account.

To post the entry:

  1. Open the MO under Manufacturing, Operations, Manufacturing Orders.
  2. Click the gear icon and choose Post WIP Accounting Entry.
  3. Select the WIP journal, adjust dates and lines, then click Post WIP.
  4. Check the Balance Sheet for that period.

By default, Odoo schedules a reversal for the next day, and you can change the Reversal Date when posting. The balance should return to zero after the reversal, so post at period end for open orders only.

This is a period-end view, not product costing. For how work center rates, labor and overhead build the unit cost, see our guide to Odoo manufacturing cost accounting.

How do partial production, backorders and continuous production affect stock?

Partial production with a backorder puts the finished part into stock now, while continuous production only moves partial quantities between work orders and adds them to stock when the MO is complete. Mixing the two up is a common source of "missing" goods.

With manufacturing backorders, you produce part of the quantity and Odoo splits the order. The first MO closes and its output enters stock, and the backorder carries the rest.

Odoo 20 adds a Continuous Production option on the bill of materials. Work orders get a Produced Quantity, so the next operation can start once some units are ready. Odoo's continuous production page states that produced quantities enter stock after the MO is complete.

So continuous production speeds up the line but does not make finished goods available sooner. If sales needs the first batch, close a backorder. Our post on Odoo 20 continuous production covers the pilot steps.

Our Odoo 20 manufacturing release notes list two more changes. A new Auto Confirm Production option decides whether replenishment creates draft or confirmed MOs, and every MO now allows flexible consumption with a warning.

How do you get manufacturing stock visibility for sales and planners?

Give each team a view that matches its question: sales needs available finished goods, planners need open MOs and quantities in progress, and finance needs value. One stock number cannot answer all three.

Who asksTheir questionWhere to look in OdooCommon mistake
SalesCan I promise this order?Forecasted quantity and open MOs for the productReading on hand only
PlannerWhat is on the floor now?MO list or Kanban filtered to in progress, Work Orders tabIgnoring partly done orders
WarehouseWhat is waiting to be stored?Stock grouped by location, Post-ProductionNever validating SFP transfers
FinanceWhat is WIP worth at month end?MO Overview Real Cost, WIP entries, Balance SheetExpecting WIP to post itself

We usually add saved filters to each team's menu, so nobody has to rebuild them. The Odoo BOM and production planning guide explains how routings feed these MO views.

Which industries struggle most with WIP inventory in Odoo?

Manufacturers with long cycle times, batch processes or many routing steps feel WIP visibility gaps first. The fix differs by how goods move through the plant.

IndustryPain or cost driverOdoo approachHow iVentureTeam helps
Machinery and fabricationOrders take weeks; value sits on the floorWIP entries at period end, backorders for staged outputSet up the month-end WIP routine
Plastics and moldingHigh volume runs, shift handoversContinuous production, partial quantitiesPilot continuous production on one line
Food and beverageBatches, lots and expiry3 step flow with lot tracking on SFPDesign pre and post-production steps
Electronics assemblyMany components, shortages mid-order2 step picking, component Consumed columnBuild shortage and pick reports
Furniture and made to orderOne MO per customer orderMTO routes, MO linked to saleShow MO progress to sales

How is this different from inventory accuracy and cost accounting?

WIP visibility is about stock that is correct but not yet in the place or state you are reading, while inventory accuracy is about stock records that are wrong. They need different fixes.

If your counts differ from the shelf, the cause is usually receiving, picking or count errors. Our guide to Odoo inventory accuracy and cycle counts covers that.

If the question is how finished goods are valued and expensed when sold, see how Odoo COGS is calculated and posted. This post stays on where production stock sits and when it appears.

How iVentureTeam helps fix Odoo work in progress inventory

Planning Odoo MRP? Price the rollout

iVentureTeam sets up Odoo Manufacturing so every team can see work in progress in the right place, at the right moment. We have delivered 150+ ERP projects across 35+ countries with 40+ Odoo specialists, led by a consultant with 13+ years in Odoo.

  • Flow review: we map your plant and pick 1, 2 or 3 steps per warehouse, with a clear owner for each transfer.
  • Location and route setup: Pre-Production, Post-Production, put-away rules and operation types, tested on real orders.
  • Reports and filters: saved views for sales, planners, warehouse and finance, as part of our Odoo implementation services.
  • WIP accounting routine: accounts, journal and a month-end checklist for posting and reversing WIP entries.
  • Odoo 20 pilots: continuous production and backorder rules on one line before you roll out.

Want a budget first? Our Odoo implementation cost calculator gives a range for a manufacturing rollout in minutes.

Odoo work in progress inventory case study: Chetan Plastics

This is the closest case we have, not a WIP-specific project: it shows the groundwork that WIP visibility depends on, which is getting production, stock and sales onto one connected Odoo system. We did not configure WIP accounting entries or 3 step routing for this client.

Chetan Plastics is a plastics-printing manufacturer in Ahmedabad, India. Its Sales, Purchase, Inventory, Manufacturing and CRM teams ran on a shared Excel file, with no link from a job to its sales order, purchase order or delivery paperwork.

Over a 16-week phased rollout, we connected Sales, CRM, Purchase, Inventory, Manufacturing, Repair and Invoicing. We added secondary units of measure across sale, purchase, invoice and stock, and 100x75mm barcode labels on a TSC printer that pull product data automatically.

A new repair workflow creates and closes stock moves automatically on confirmation and completion. The difference from this article: the project solved traceability, not WIP valuation. Read the Chetan Plastics Odoo manufacturing case study.

The bottom line on Odoo work in progress inventory

Zero finished goods in Odoo almost always means the stock is still open on an MO, waiting in Post-Production or hidden by a report filter, not lost. Fix the flow before you blame the data.

Pick the manufacturing steps that match your floor, record partial output when sales needs it, train the warehouse to validate store transfers, and post WIP entries at month end. Then sales, planners and finance will finally agree on what you have.

Ready to make WIP visible in your Odoo plant?

Book a manufacturing review

Get your manufacturing steps, locations and WIP routine reviewed by people who set them up every week. Ask for an Odoo manufacturing stock review, call +91-90235-15208, or email business@iventureteam.com.

Frequently Asked Questions

Why does my finished product show zero stock after production in Odoo?

+

Usually the MO is not marked done, or the goods sit in Post-Production under 3 step manufacturing. Click Produce on the MO, then validate the Store Finished Product transfer if your warehouse uses 3 steps.

Does Odoo have a WIP location?

+

Not one single location. Picked components wait in Pre-Production, built goods wait in Post-Production in 3 step mode, and consumption runs through the virtual Production location. Value goes to a WIP account when you post a WIP entry.

Why is the Production location negative in Odoo?

+

Production is a virtual location. Components move into it when consumed and finished goods move out of it when produced, so negative balances are normal. Exclude virtual locations from your stock reports.

How do I post WIP accounting entries in Odoo?

+

Open the manufacturing order, click the gear icon and choose Post WIP Accounting Entry. Pick the journal, adjust dates and lines, then post. Odoo schedules a reversal for the next day by default.

Does continuous production in Odoo 20 add finished goods to stock earlier?

+

No. Continuous production lets the next work order start on partial quantities, but Odoo's docs say produced quantities enter stock after the MO is complete. Use a backorder to release a first batch.

How do I make partly finished goods available to sell?

+

Enter the quantity produced on the MO, click Produce and create a backorder for the rest. The first order closes and its output enters stock, while the backorder keeps the remaining quantity open.

Should I use 2 step or 3 step manufacturing in Odoo?

+

Use 2 steps when you want a picking record for components. Use 3 steps only when finished goods really move to a separate store area and someone owns validating that transfer every day.

Can I change where Odoo puts finished products?

+

Yes. Set the default destination on the Manufacturing operation type and use put-away rules for shelves. The finished products location on an MO is set while the order is in draft.

Is WIP the same as an inventory accuracy problem?

+

No. WIP gaps come from stock that is correct but still on an open order or in another location. Accuracy problems come from wrong records, which cycle counts and better receiving fix.

Free written answer from a certified consultant

Getting stock under control in Odoo?

Tell us how stock moves through your business. We map warehouses, routes and replenishment in Odoo and show what to configure first.

Free, with no obligation. A senior consultant replies within 12 business hours.

We use cookies to improve your experience

Essential cookies make the site work, and we use analytics to improve it. Choose “Only necessary” to turn analytics off. See our cookie policy.