Skip to main content
iVentureTeam
Odoo Upgrades

DDMRP in Odoo: Buffers, Forecasting and Replenishment in Odoo 19/20

DDMRP in Odoo explained: what standard Odoo 19 and 20 replenishment covers, what the OCA DDMRP modules add, buffer formulas, setup steps and limits.

Siddharth JambukiyaSiddharth JambukiyaOdoo Techno-Functional Consultant
November 22, 202614 min read0 views
DDMRP in Odoo: Buffers, Forecasting and Replenishment in Odoo 19/20 cover

Searches for DDMRP in Odoo usually come from planners facing two problems at once: stockouts on key parts and too much stock of everything else. Our Odoo customization services start by testing whether standard replenishment can fix that before any module is added.

Related service: Odoo upgrade services — version upgrades with custom modules ported and tested.

This guide is for supply chain managers, production planners and CFOs at manufacturers and distributors on Odoo 19 or 20. If shortages are today's main pain, start with our guide to reorder rules, safety stock and MRP alerts in Odoo.

What is DDMRP, and how is it different from MRP in Odoo?

DDMRP, or Demand Driven Material Requirements Planning, sizes stock buffers at a few chosen points and refills them from real demand, while classic MRP in Odoo turns forecasts and orders into a dated plan for every item. The method was developed by Carol Ptak and Chad Smith.

The Odoo module's own description lists five components, applied in this order:

  1. Strategic inventory positioning: decide where buffers, also called decoupling points, sit in the bill of materials and the network.
  2. Buffer profiles and levels: set how much protection each buffer holds.
  3. Dynamic adjustments: change buffers as demand, seasons or lead times change.
  4. Demand driven planning: launch purchase, manufacturing and transfer orders by buffer priority.
  5. Visible and collaborative execution: manage open orders by the status of the buffer they feed.

The practical difference is the trigger. In MRP, a forecast change ripples through every level of the bill of materials (BoM). In DDMRP, a buffer absorbs it, and an order is raised only when net flow position drops below the top of yellow.

Buffers sit on BoM levels, so messy BoMs and routings must be fixed first. Our Odoo BoM and production planning guide covers that groundwork.

Does standard Odoo 19 or 20 support DDMRP?

DDMRP in Odoo: Standard Odoo or OCA DDMRP buffers?

No, standard Odoo 19 and Odoo 20 do not ship a DDMRP feature in Community or Enterprise. Odoo's documentation lists three ways to replenish stock: reordering rules, the make to order route and the Master Production Schedule.

CapabilityStandard Odoo 19/20With OCA DDMRP modules
Reorder triggerForecast below the rule's MinNet flow below top of yellow
Stock targetMin and Max per ruleRed, yellow and green zones
Demand inputSales orders and MPS forecastAverage daily usage per buffer
Lead timeVendor and manufacturing lead timesDecoupled lead time per buffer
Demand spikesNo spike rule built inSpike threshold and horizon
ResizingSuggest button in Odoo 20, run by a userRecalculated by scheduled actions

DDMRP for Odoo is not new. At Odoo Experience 2017, the author of the DDMRP app presented the method on Odoo 10. It has remained a community project under the Odoo Community Association (OCA), not a core app.

What does standard Odoo replenishment planning cover?

Standard Odoo replenishment planning covers reordering rules, just-in-time ordering, horizon days and manual or automatic triggers, which is enough for many stable items. Test these before you add any DDMRP software.

The Suggest Min-Max dialog is new in Odoo 20. Our Odoo 20 Inventory release notes show that it sets levels from demand history, days of coverage and order frequency.

It answers a long-standing request. On the Odoo forum, one user asked whether Min and Max could follow sales history, seasonality and lead time automatically. The best answer called standard reordering rules mostly static.

The limits remain. A person decides when to click Suggest, and there is no zone logic, spike filter or priority by buffer status.

How does Odoo MRP forecasting work with the Master Production Schedule?

Odoo MRP forecasting runs through the Master Production Schedule (MPS), an Enterprise feature that plans replenishment against a demand forecast you enter or let Odoo suggest. You enable it in Manufacturing settings and plan in daily, weekly, monthly or yearly periods.

For each period, the Odoo MPS suggests a replenishment quantity: the safety stock target, minus starting stock, plus forecasted demand, plus indirect demand from parent products.

Odoo demand forecasting in the MPS can be typed in or suggested from the last 30 days, 3 months or 12 months, or from the same period a year ago.

Odoo's documentation adds a caution: do not apply reordering rules to products in the MPS, because that creates inaccurate forecasts and unnecessary orders. The MPS is also not part of Odoo Community.

What does a forecast do in MRP vs DDMRP?

In MRP the forecast drives the plan, while in DDMRP the forecast only helps size the buffers and real demand drives the orders. Confusing the two roles is a common reason stock grows after a planning project.

QuestionMPS and MRP in OdooDDMRP in Odoo (OCA)
What the forecast feedsForecasted demand per periodAverage daily usage (ADU)
What creates ordersSuggested replenishment per periodNet flow position against the zones
Effect of a forecast errorWrong quantities are orderedBuffer is somewhat too big or too small

The OCA module offers four ADU methods: fixed, past-looking, future-looking and blended. The source can be stock moves or demand estimates, and the default methods look 120 days back or ahead.

What do the OCA DDMRP modules add to Odoo?

The OCA DDMRP modules add a Stock Buffer record to Odoo Inventory, with calculated zones, buffer profiles and priorities that carry onto purchase and manufacturing orders. The core module is LGPL-3, marked Production/Stable, and authored by ForgeFlow with the OCA.

ModuleWhat it adds
ddmrpBuffers, profiles, ADU, decoupled lead time, net flow and priorities
ddmrp_adjustmentFactor adjustments applied to buffers
ddmrp_historyStored history of buffer data
ddmrp_report_part_flow_indexThe Parts Flow Index report
stock_buffer_routeForces a route when procuring from a buffer

The DDMRP listing on the Odoo Apps Store shows versions from 11.0 to 18.0 and the community modules it depends on.

Those dependencies matter. The core module needs other OCA modules, including stock_demand_estimate, mrp_multi_level, stock_warehouse_calendar and web_widget_bokeh_chart. Each must exist for your Odoo version. Our guide to Odoo third-party module cost explains the upkeep.

How is a DDMRP buffer calculated in Odoo?

A DDMRP buffer in Odoo is calculated from average daily usage, decoupled lead time (DLT) and two profile factors: lead time and variability. The formulas below are read from the OCA module's code for its standard replenish method.

Zone or valueFormula in the OCA module
Yellow zoneADU x DLT
Red baseADU x DLT x lead time factor
Red safetyRed base x variability factor
Green zoneLargest of: order cycle x ADU, ADU x DLT x lead time factor, minimum order quantity
Net flow positionUnreserved on-hand stock plus supply due within the DLT, minus qualified demand
Order spike threshold50% of the red zone by default
Recommended orderTop of green minus net flow, when net flow is below top of yellow

The module ships default factors. Lead time factors are 0.75 for short, 0.5 for medium and 0.25 for long lead times. Variability factors are 0.25 for low, 0.5 for medium and 0.75 for high.

Here is an illustrative example. A part has an ADU of 20 units, a DLT of 10 days, medium factors of 0.5, a 3-day order cycle and a minimum order of 50. Yellow is 200, red is 150 (100 base plus 50 safety) and green is 100.

Top of red is 150, top of yellow is 350 and top of green is 450. With 120 on hand, 150 incoming and 40 of qualified demand, net flow is 230. That is below 350, so the buffer recommends ordering 220 and shows a yellow planning priority.

How do you set up DDMRP in Odoo step by step?

A DDMRP setup in Odoo follows the method's own order: position buffers, set profiles, calculate usage, then let buffers drive orders. Run every step on a test database with a copy of real data first.

  1. Check prerequisites: Odoo.sh or on-premise hosting, the Inventory, Purchase and Manufacturing apps, and every OCA dependency for your version.
  2. Clean lead times: set the Manufacturing Lead Time on made products and the Delivery Lead Time on each vendor line. The module computes DLT from them.
  3. Add locations to BoMs: fill the Location on each BoM and its lines, then print the BOM Structure report to see buffers, lead times and DLT.
  4. Choose buffer positions: start with a short list, such as long lead time components and high-volume finished goods.
  5. Set buffer profiles: pick the item type (purchased, manufactured or distributed), a lead time factor and a variability factor.
  6. Pick an ADU method: past-looking if stock move history is clean; fixed or future estimates if it is not.
  7. Create stock buffers: go to Inventory, Master Data, Stock Buffer Planning, and add minimum order quantity and order cycle where they apply.
  8. Switch reservation to manual: the module recommends manual reservation on outgoing operation types, because the buffer cannot see reserved stock.
  9. Check the scheduled actions: by default ADU is recalculated daily and buffers every 8 hours.
  10. Plan from the buffer list: work red buffers first, and remove old reordering rules for buffered products.

Which Odoo versions and hosting support the DDMRP modules?

The DDMRP modules run on Odoo.sh and on-premise servers, and the widest module set is on older versions. Odoo's documentation states that Odoo Online is incompatible with custom modules and the Odoo Apps Store.

Odoo versionOCA ddmrp repository on 22 November 2026Note
18.019 addons, core 18.0.1.11.1Widest set, with two packaging addons
19.017 addons, core 19.0.1.2.1Adjustments, history and reports present
20.04 addons, core 20.0.1.0.0Core, chatter, history and warning so far

If you need adjustments or the Parts Flow Index report on Odoo 20 today, you can wait, fund the port, or start on Odoo 19. Our guide on installing third-party modules on Odoo.sh, on-premise and Online covers the mechanics.

Budget for the plan too. On Odoo Enterprise, Odoo.sh and on-premise hosting sit in the Custom plan, listed on the Odoo pricing page at US$61.00 per user a month billed yearly in the US. The DDMRP modules carry no license fee.

Plan for upgrades. Odoo's upgrade service does not cover third-party or in-house modules without a maintenance contract, so someone must port and test the DDMRP modules at every version change.

Which industries benefit from DDMRP in Odoo?

DDMRP in Odoo pays off where lead times are long, demand is uneven and shared components feed many products. See how planning fits the wider factory on our Odoo ERP for manufacturing page.

IndustryPain or cost driverOdoo approachHow iVentureTeam helps
Machinery and discrete manufacturingLong lead time parts stall assemblyBuffers on purchased parts and key subassembliesPosition buffers from BoM lead times
Food and beverageShelf life limits safe stockSmall buffers reviewed often; make to order for short-life itemsCombine buffers with expiry rules
Plastics and packagingMinimum order quantities on resin and filmGreen zone sized by minimum order or order cycleSet order minimums and cycles per vendor
Wholesale distributionMany SKUs across warehousesDistributed buffers per locationDesign resupply routes and profiles

When is DDMRP the wrong choice for your Odoo project?

Planning a buffer pilot? Estimate the project first

DDMRP is the wrong choice when your data is unreliable, your items are mostly made to order, or a few tuned reordering rules would solve the problem. Buffers calculated from wrong stock or lead times fail faster than manual rules.

  • Stock accuracy is poor: fix counts first with cycle counts and stock discrepancy checks.
  • Products are engineered or made to order: there is little repeat usage to average.
  • You run Odoo Online: the modules cannot be installed there.
  • Few items with stable demand: the Suggest Min-Max button in Odoo 20 may be all you need.
  • Nobody owns planning: buffers need a planner who reviews profiles and adjustments.

A sound middle path is a pilot: buffer one product family and keep the rest on reordering rules or the MPS. For a first budget number, try the Odoo project estimate tool.

How iVentureTeam helps you run DDMRP in Odoo

iVentureTeam helps you decide whether DDMRP in Odoo is worth it, then configures and maintains it. We have delivered 150+ ERP projects across 35+ countries with 40+ Odoo specialists, led by a consultant with 13+ years in Odoo.

  • Fit check: your items, lead times and stock history reviewed to see where buffers would help and where they would not.
  • Standard first: reordering rules, lead times and the MPS tuned before any module is added.
  • Module setup: OCA DDMRP modules and dependencies installed on Odoo.sh or on-premise, with buffer profiles and ADU methods configured.
  • Porting and upgrades: our Odoo development team can port addons missing on your version and retest them at each upgrade.
  • Planner training: your team learns to read buffer status and adjust profiles.

DDMRP in Odoo case study: KMF Technologies (stock data first)

This is not a DDMRP project; it shows the step that has to come first, which is stock figures a planner can trust. KMF Technologies is an IT services and hardware distributor in The Gambia, not a manufacturer.

Before Odoo, products and categories were tracked by hand. There was no real-time stock visibility, which led to overstocking and stock-outs.

We configured Sales, Purchase, Inventory and Accounting around KMF's workflows, defined warehouses, stock locations and units of measure, and imported the full product master with integrity checks. The phased rollout took 8 weeks.

KMF now has real-time stock levels across warehouses and fewer entry errors. Its director said: "We went from guessing stock levels to trusting them." Any buffer depends on that base. Read the KMF Technologies Odoo inventory case study.

The bottom line on DDMRP in Odoo

DDMRP in Odoo is real and usable, but it is a community add-on, not a standard feature, and it pays off only on clean data with a planner in charge. Standard Odoo 20 has also narrowed the gap with suggested Min and Max levels.

Start with the standard tools, measure where they fall short, and pilot buffers on one product family. Check the OCA module list for your version first.

Ready to find out if DDMRP fits your Odoo plan?

Request a DDMRP fit check

Bring your item list, lead times and stock history, and we will show where buffers would help. Request a DDMRP and replenishment fit check, call +91-90235-15208, or email business@iventureteam.com.

Frequently Asked Questions

Does Odoo have DDMRP?

+

Not as a standard feature. Odoo 19 and 20 plan with reordering rules, make to order and the Master Production Schedule. DDMRP comes from community modules maintained under the Odoo Community Association.

Is the Odoo DDMRP module free?

+

The OCA DDMRP modules are open source under LGPL-3 and carry no license fee. You still pay for hosting that accepts third-party modules, plus setup, training and porting at each upgrade.

Can I use DDMRP on Odoo Online?

+

No. Odoo Online does not accept custom or Apps Store modules. You need Odoo.sh or an on-premise server, which on Odoo Enterprise means the Custom plan.

Does DDMRP work with Odoo 20?

+

Partly, at the time of writing. On 22 November 2026 the OCA 20.0 branch listed the core module plus chatter, history and warning addons. The 19.0 branch listed 17 addons, so check what you need.

What is the difference between reordering rules and DDMRP buffers?

+

A reordering rule holds a fixed Min and Max that a person sets. A DDMRP buffer calculates red, yellow and green zones from daily usage and lead time, then orders when net flow falls below the top of yellow.

Does DDMRP use a forecast?

+

Yes, but only to size buffers. A forecast can feed average daily usage through demand estimates. Orders are raised from actual stock, open supply and qualified demand, not from the forecast itself.

What is net flow position in DDMRP?

+

It is on-hand stock plus incoming supply minus qualified demand. Qualified demand counts due demand and future order spikes above a threshold. The buffer compares this figure with its zones to decide whether to order.

Can DDMRP and the Odoo MPS run together?

+

They can share one database when each product uses one method. Odoo warns against mixing reordering rules with MPS products, and the same logic applies to buffers: one planning method per item.

Free manufacturing walkthrough

Running manufacturing on Odoo?

Our manufacturing consultants map your BoMs, routings and planning in Odoo and show what to configure first.

Free, with no obligation. A senior consultant replies within 12 business hours.

We use cookies to improve your experience

Essential cookies make the site work, and we use analytics to improve it. Choose “Only necessary” to turn analytics off. See our cookie policy.