Odoo Putaway Rules and Storage Categories: Setup, Priority and Fixes
Set up Odoo putaway rules and storage categories in Odoo 19 and 20: rule priority, capacity by weight, product and package, worked examples and fixes.
Most putaway problems in Odoo are not bugs. The rule sits on the wrong location, a weight limit is left at zero, or one receipt line is bigger than any bin. Our Odoo implementation services include a putaway design step, so receipts land where pickers expect them.
Related service: Odoo implementation services — fixed-scope implementations with a named senior team.
This guide is for warehouse managers, inventory leads and Odoo admins on Odoo 19 or 20. It stays on putaway only. For locations, picking and counting as a whole, start with our Odoo warehouse management system guide.
What are Odoo putaway rules and storage categories?

Odoo putaway rules decide where incoming stock is stored, and Odoo storage categories tell the system how much each location can hold. You can use rules alone, but capacity checks need both.
Odoo's docs define putaway as routing products to appropriate storage locations upon shipment arrival. The rule changes the destination on the transfer line, so the operator sees a suggested bin instead of plain WH/Stock.
| Point | Putaway rules | Storage categories |
|---|---|---|
| Job | Pick the destination sub-location | Limit what a location can hold |
| Menu | Configuration > Putaway Rules | Configuration > Storage Categories |
| Matches on | Product, category or package type | Weight, product quantity, package count |
| Set on | The arrival location | Each storage sub-location |
| Needs | Multi-Step Routes setting | Storage Locations plus a putaway rule |
| Typical mistake | Rule on the wrong arrival location | Max Weight left at zero |
Putaway is the inbound side only. Which stock leaves first is a separate setting, covered in our guide to Odoo removal strategies for FIFO, LIFO and FEFO.
How goods travel between warehouses, steps and operation types is a routing question. That belongs to our guide on Odoo inventory routes and rules. A good Odoo putaway strategy starts after the route has brought stock to the right warehouse.
How do you set up Odoo putaway rules in Odoo 19 and 20?
You set up Odoo putaway rules in five steps: turn on Multi-Step Routes, build sub-locations, add the rules, add package types if needed, then test with a real receipt. The menus are the same in both versions.
- Settings: go to Inventory > Configuration > Settings and activate Multi-Step Routes. The putaway rules documentation for Odoo 20 notes that Storage Locations is activated with it.
- Locations: create sub-locations under WH/Stock, such as WH/Stock/Shelf A. The Store to location must sit inside the arrival location.
- Rules: open Inventory > Configuration > Putaway Rules, click New, and fill in "When product arrives in", Product or Product Category, and "Store to".
- Package types: to match on pallets or boxes, enable Packages in Settings. The Package type column then appears on the rule.
- Test: create a receipt, check the destination on each line, and validate it. Fix the rule before you add the next one.
Leave Product and Product Category empty to create a catch-all rule for every product. Odoo's docs suggest pairing that empty rule with the Last Used option, so each product returns to the bin it used before.
Rules are stored per company, and a rule can be archived instead of deleted. In the stock source, opening the rule list from a product, a product category or a location pre-fills that field on new rules.
Which Odoo putaway rule wins when several rules match?
The most specific Odoo putaway rule wins: package type first, then product, then product category. Odoo works down the list below and stops at the first rule whose location can accept the stock.
| Priority | Rule matches on | Example |
|---|---|---|
| 1 | Package type and product | A Pallet of Lemonade cans goes to WH/Stock/Pallets/PAL1 |
| 2 | Package type and product category | A Box of any All/drinks item goes to WH/Stock/Shelf 1 |
| 3 | Package type only | Any product on a Pallet goes to WH/Stock/Pallets |
| 4 | Product | Lemonade can goes to WH/Stock/Shelf 2 |
| 5 | Product category | All/drinks goes to WH/Stock/Small Refrigerator |
| 6 | Nothing set (catch-all) | Every other product goes to one default location |
Rows 1 to 5 are the priority list and examples from Odoo's documentation. Row 6 is our addition: in the stock source, a rule with no product, category or package type sorts below all the others.
The 19.0 and 20.0 source adds two details the docs skip. A rule on the product's own category beats a rule on a parent category. A parent category rule still covers every child category beneath it.
When two rules are equally specific, the order of the list decides. Drag rules with the handle on the left of the Putaway Rules list to put the preferred one first.
Priority is not the whole story. If the location of the winning rule fails its capacity check, Odoo moves to the next matching rule. That is how you build a fallback bin.
What do the Sublocation options No, Last Used and Closest Location do?
The Sublocation field tells an Odoo putaway rule whether to use the Store to location itself, the last bin used, or a bin from a storage category. It is the link between rules and capacity.
| Option | Where the stock goes | Use it when |
|---|---|---|
| No | Exactly the Store to location | One fixed bin per product or category |
| Last Used | The last location under Store to that received this product | Operators choose bins and you want them to stay stable |
| Closest Location | A sub-location that carries the chosen storage category | You need capacity checks across many bins |
Last Used looks at the most recent completed move of that product into the Store to location or its children. With no history, the Store to location is used.
The Odoo closest location putaway option needs a storage category in the Having Category column. Despite the name, it does not measure distance. In the source, it first prefers a bin that already holds that product or package type, then the first bin with room.
Odoo's docs add that when every bin in the category is full, the Store to location is used. Treat that parent location as a visible overflow area and review it every day.
How do Odoo storage categories limit capacity by weight, product and package?
Odoo storage categories limit each location by maximum weight, by quantity per product, or by number of packages per package type. The limit applies to every location that carries the category, not to the category as a whole.
- Create: go to Inventory > Configuration > Storage Categories, click New, and name it, for example "Pallet rack, 2 pallets".
- Assign: open each sub-location and choose the category in its Storage Category field.
- Link: on the putaway rule, set Sublocation to Closest Location and choose the category under Having Category.
| Capacity type | Where you set it | How Odoo checks it | Watch out for |
|---|---|---|---|
| Weight | Max Weight field | Weight in the location plus incoming weight must not exceed the limit | Zero rejects any product that has a weight |
| Product | Capacity by Product tab | Quantity in the location plus the incoming line must not exceed the quantity | Only the products you list are capped |
| Package | Capacity by Package tab | Packages of that type must stay below the quantity | Needs the Packages setting and a package type |
Odoo's storage category documentation says weight limits can be combined with product or package capacity, for example one hundred products with a total weight of two hundred kilograms.
Odoo location capacity counts stock on hand plus quantities already assigned to that location on open transfers. Two receipts planned for the same bin are not both sent there if the second would overfill it.
A storage category guides the suggestion. Odoo's docs describe it as recommending the best location on the transfer form. In our experience operators can still enter another location by hand, so train them to follow the suggestion.
What does Allow New Product mean on an Odoo storage category?
Allow New Product decides whether a location that already holds stock may receive another product. It has three values, and the default in the stock source is mixed products.
| Policy | The location accepts stock when | Good for |
|---|---|---|
| If the location is empty | It holds no stock at all | One pallet or one lot per slot |
| If all products are same | It is empty or holds only that product | Dedicated pick bins with no mixing |
| Allow mixed products | The capacity limits still pass | Bulk zones and overflow shelves |
The "same product" policy also looks at open transfers. If another product is already on its way to that bin, the source rejects the bin for your product.
The "empty" policy is strict. A bin holding one unit is not empty, so a top-up of the same product goes to the next free bin. Use the "same" policy if you want top-ups in one place.
Odoo putaway rules examples you can copy
Three Odoo putaway rules examples cover most warehouses: one zone per category, pallet slots with package capacity, and pick bins with product capacity. The product names and quantities in examples 1 and 3 are illustrative.
Example 1: one zone per product category
A food distributor creates WH/Stock/Chilled and WH/Stock/Dry. Rule one sends the Chilled category arriving in WH/Stock to WH/Stock/Chilled. Rule two sends the Dry category to WH/Stock/Dry. A catch-all rule with Last Used handles everything else.
Example 2: pallet slots that hold two pallets
This follows Odoo's own example. A storage category named "High frequency pallets" has a Capacity by Package of 2 Pallets. It is assigned to PAL1 and PAL2 under WH/Stock/Pallets.
The rule reads: package type Pallet, Store to WH/Stock/Pallets, Sublocation Closest Location, Having Category "High frequency pallets". Odoo's docs list the results:
- Both slots empty: the pallet goes to WH/Stock/Pallets/PAL1.
- PAL1 full: the pallet goes to WH/Stock/Pallets/PAL2.
- Both full: the pallet goes to the parent, WH/Stock/Pallets.
Example 3: pick bins capped at 50 units
A storage category "Small parts bin" has a Capacity by Product of 50 units of Bracket X and the "same product" policy. It is assigned to BIN-01 and BIN-02.
A receipt of 30 brackets goes to BIN-01. A second receipt of 30 would bring BIN-01 to 60, above the cap, so Odoo suggests BIN-02. A single line of 80 is larger than any bin, so Odoo cannot place it in a bin and you split it by hand.
Why does Odoo not split a receipt across several locations?
Odoo does not split a receipt line across locations because putaway picks one destination for each transfer line. This is the limit that surprises warehouse teams most.
The docs state it plainly: Odoo does not automatically split quantities across multiple storage locations. Their example is a location that can hold 10 units when 12 arrive. All 12 are still assigned to one location.
Users hit this often. One expected five T-shirts in each of two bins and wrote, "I find all 10 of them in WH/Stock/01". Another asked for 600 units to be split into 200 and 400 by capacity.
You have three practical options:
- Split on the receipt: open Details on the line, click Add a line, and enter one quantity per location.
- Receive in packages: give each pallet its own package and package type, then check the result. Odoo's docs note that two pallets on one receipt may still need a manual split.
- Customize: a small module can split lines by remaining capacity. Our Odoo customization services build this when the receipt volume justifies it.
Odoo putaway rules not working: common mistakes and fixes
When Odoo putaway rules are not working, the cause is usually the arrival location, the location tree or a storage category limit. Check the table from top to bottom.
| Symptom | Likely cause | Fix |
|---|---|---|
| No rule ever fires | Multi-Step Routes or Storage Locations is off | Activate both in Inventory Settings |
| Rule ignored on receipts | Receipt arrives in WH/Input, rule sits on WH/Stock | Put the rule on the location the transfer arrives in |
| Bin missing in Store to | Bin is not inside the arrival location | Move the bin under the arrival location |
| Bins with a category are skipped | Max Weight is 0 and products have a weight | Set Max Weight above zero |
| Wrong rule applies | A more specific rule or a higher list position wins | Review priority and drag order |
| A big line skips every bin | The line is larger than the bin capacity | Split the line or receive per package |
| Package rule ignored | Packages is off or the package has no type | Set the package type before putaway |
| Same product spread over many bins | Policy is "If the location is empty" | Switch to "If all products are same" |
The Max Weight trap is real. In an Odoo forum thread about putaway rules not being applied, the best answer pointed to the Max Weight field. Odoo's docs carry the same note: set it above 0 when a product weight is defined.
With two or three step receipts, goods arrive in WH/Input first. A rule on WH/Stock then runs on the internal transfer into stock, not on the receipt itself. Decide which transfer should carry the bin suggestion.
Rules are applied when the transfer line is created. A rule you change afterwards does not move stock that is already on the shelf. Test changes with a new receipt.
Bin errors that slip through show up later in counts. Pair putaway with scanning and regular counts: see our Odoo barcode scanning guide and our guide to fixing stock discrepancies with cycle counts.
What changed for putaway rules between Odoo 19 and Odoo 20?
Very little changed: Odoo 19 putaway and putaway rules in Odoo 20 use the same menus, fields and priority order. We compared the 19.0 and 20.0 documentation pages and the stock module source on 21 November 2026.
- Docs: the putaway and storage category pages carry the same text in 19.0 and 20.0.
- Closest Location: in 20.0 the Store to location itself is left out of the category bins that Odoo checks.
- Rule list: 20.0 adds an Archived filter to the Putaway Rules search.
- Custom code: the unit field on capacity lines was renamed from product_uom_id to uom_id, which matters for custom modules and imports.
So a putaway design built on Odoo 19 carries over to Odoo 20. After an upgrade, retest rules that rely on Closest Location and any custom split logic.
Which industries get the most from Odoo warehouse putaway?
Odoo warehouse putaway pays off most where product types must stay apart or bins fill up fast. The table shows typical patterns.
| Industry | Pain or cost driver | Odoo approach | How iVentureTeam helps |
|---|---|---|---|
| Food and beverage distribution | Chilled and dry goods mixed at receipt | Category rules per temperature zone | Zone design and rule testing |
| Wholesale and 3PL | Pallet slots overfilled | Package capacity per slot | Location naming and slot limits |
| Retail and eCommerce | Pick bins overflow while bulk space sits unused | Product capacity on pick bins plus an overflow zone | Bin sizing from your sales data |
| Manufacturing | Raw materials stored far from the lines | Product rules to line-side locations | Rules matched to your shop floor |
| Chemicals and pharma | Incompatible goods stored side by side | Separate zones with single-product bins | Policy setup and periodic checks |
Storage design depends on your sector. See how we set up warehouses on our page for Odoo ERP for logistics companies and stockrooms on our page for Odoo ERP for retail.
How iVentureTeam helps you set up Odoo putaway rules

iVentureTeam designs, configures and tests Odoo putaway rules and storage categories as part of your warehouse setup. We have delivered 150+ ERP projects across 35+ countries with 40+ Odoo specialists, led by a consultant with 13+ years in Odoo.
- Layout mapping: racks, zones and bins turned into an Odoo location tree with clear names and barcodes.
- Rule design: a short, ordered rule list by package type, product and category, with a catch-all at the end.
- Capacity setup: storage categories with weight, product and package limits taken from real bin sizes.
- Testing: receipts for every rule, including full bins and oversized lines, before go-live.
- Scoping: get a quick budget range from our Odoo project estimate tool before you talk to us.
Odoo putaway rules case study: KMF Technologies
KMF Technologies is our closest fit, not a putaway project: it shows the location and product groundwork that putaway rules depend on. The case page does not mention putaway rules or storage categories.
KMF Technologies is an IT services and hardware distribution firm in The Gambia. Products and categories were tracked by hand. The firm had no real-time stock visibility, which led to overstocking and stock-outs.
We implemented Odoo Sales, Purchase, Inventory and Accounting in an 8 week phased rollout. The work included defining warehouses, product categories, stock locations and units of measure, and importing the full product master.
That is the base any putaway design needs: clean categories and locations that match the shelves. The director said, "Inventory in Odoo matches the shelf." Read the KMF Technologies Odoo inventory implementation case study.
The bottom line on Odoo putaway rules
Odoo putaway rules work well when the location tree is right, the rule list is short and every rule is tested with a real receipt. Storage categories add capacity checks, but they suggest one bin per line and never split a line.
Start with category rules and a catch-all. Add storage categories only where bins really fill up. Set Max Weight above zero, choose the Allow New Product policy on purpose, and write down how operators split oversized lines.
Ready to fix your Odoo putaway rules?

Send us your warehouse layout and we will show you how it maps to Odoo locations, rules and capacities. Request an Odoo putaway and warehouse setup review, call +91-90235-15208, or email business@iventureteam.com.
Frequently Asked Questions
What is a putaway rule in Odoo?
+
A putaway rule tells Odoo where to store incoming stock. It says that when a product, product category or package type arrives in one location, it should be stored in a chosen sub-location of it.
How do I enable putaway rules in Odoo?
+
Go to Inventory, Configuration, Settings and activate Multi-Step Routes. Storage Locations is activated with it. Then create rules under Inventory, Configuration, Putaway Rules.
What is the priority of putaway rules in Odoo?
+
Odoo checks package type and product first, then package type and category, package type alone, product, and product category. A rule with nothing set acts as a catch-all and comes last.
What is a storage category in Odoo?
+
A storage category sets capacity limits for the locations it is assigned to. It can limit maximum weight, quantity per product and number of packages per package type, and it controls product mixing.
Why are my Odoo putaway rules not working?
+
Common causes are a rule set on the wrong arrival location, a Store to bin outside that location, Multi-Step Routes turned off, or a storage category with Max Weight left at zero.
Can Odoo split a receipt across multiple locations automatically?
+
No. Odoo's documentation says it does not automatically split quantities across storage locations. Split the line by hand in Detailed Operations, receive per package, or add custom logic.
What is the difference between putaway rules and removal strategies in Odoo?
+
Putaway rules decide where incoming stock is stored. Removal strategies such as FIFO, LIFO and FEFO decide which stock is picked first when goods leave. They are configured separately.
Do putaway rules work the same in Odoo 19 and Odoo 20?
+
Yes. The documentation pages are the same for both versions, and the stock source shows only small differences, such as an Archived filter on the rule list in Odoo 20.
Does Closest Location pick the physically nearest bin?
+
No. It uses bins that carry the chosen storage category. In the source it prefers a bin that already holds the product or package type, then the first bin that passes the capacity check.
Free written answer from a certified consultant
Getting stock under control in Odoo?
Tell us how stock moves through your business. We map warehouses, routes and replenishment in Odoo and show what to configure first.
Free, with no obligation. A senior consultant replies within 12 business hours.
Free Odoo tools
All tools- Odoo Health CheckVersion, modules, findings and upgrade cost
- Odoo App SelectorWhich apps you need, by industry
- Odoo Project EstimateIndicative cost and timeline in minutes
- Odoo Implementation Cost CalculatorImplementation cost and timeline, in minutes
- Odoo Migration Cost CalculatorVersion jump or legacy ERP, priced in minutes
Continue reading
Spreadsheets After ERP Implementation: Why Odoo Users Keep Excel
Why teams keep Excel after an Odoo go-live, the hidden risks of shadow spreadsheets, and a fix plan using Odoo 20 Spreadsheet, Dashboards and imports.
Odoo ERP Implementation in Saudi Arabia: ZATCA, Arabic, Cost, Timeline
Odoo ERP implementation in Saudi Arabia: Odoo 19 vs 20, ZATCA Phase 2 onboarding, Arabic invoices, GOSI and WPS payroll, hosting, cost and timelines.
Odoo Post Implementation Review: 30/60/90 Day Checklist and Template
Run an Odoo post implementation review at 30, 60 and 90 days: go-live checklist, six KPIs, Odoo 19 and 20 checks and a report template you can copy.
